Our steel purlins are roll-formed from Hi-Tensile Galvanised steel. They are primarily used to provide lightweight, economical, efficient roofing and cladding support systems for framed structures. Our hot dip galvanized purlins are available in a range of different sizes and configurations.As the purlins are pre-punched in our factory, they are quick to install and suitable for both insulated and uninsulated roofs and walls.
C purlin & Z purlin product description
Features:
1.Manufactured from high tensile galvanized steel
2.Despotic C & Z section steel , Z section steel is roll- formed from galvanized steel ,specification to be complete.
3.Make from quality raw material.
4.Pre-punched holes based on detail design.
5.Complete assessories package available.
6.C purlin, Z purlin and H beam are widely used in factory buildings,large -span bridges,gymnasiums and portable houses.
7.C purlin may be used in single spans and continuous spans in multi-bay buildings.
8.We can make adjustment to meet your inquiries as we can do.
| Brand Name:SXGG : |
Product Name: Z Purlin Z |
| Model NO. |
Section size (mm) |
Hole distance (mm) |
|
| H |
B1 |
B2 |
C |
T |
h |
Length (m) |
| Z100 |
100 |
55 |
50 |
20 |
2.0-3.0 |
40 |
<=11.8m (as customer's requirement ; |
| Z120 |
120 |
55 |
50 |
20 |
2.0-3.0 |
adjusted |
| Z140 |
140 |
55 |
50 |
20 |
2.0-3.0 |
adjusted |
| Z150 |
150 |
67 |
61 |
20 |
2.0-3.0 |
adjusted |
| Z160 |
160 |
67 |
61 |
20 |
2.0-3.0 |
adjusted |
| Z180 |
180 |
67 |
61 |
20 |
2.0-3.0 |
adjusted |
| Z200 |
200 |
67 |
61 |
20 |
2.0-3.0 |
adjusted |
Steel Purlin typically refers to roof framing members that span parallel to the building eave, and support the roof decking or sheeting. The purlins are in turn supported by rafters or walls. Purlins are most commonly used in Metal Building Systems, where Z-shapes are utilized in a manner that allows flexural continuity between spans.<o:p>
It is the practice in the steel industry that structural shapes are assigned representative designations for convenient shorthand description on drawings and documentation: Channel sections, with or without flange stiffeners, are usually referenced as C shapes; Channel sections without flange stiffeners are also referenced as U shapes; Point symmetric sections that are shaped similar to the letter Z are referenced as Z shapes. Section designations can be regional and even specific to a manufacturer. In steel building construction, secondary members such as purlins (roof) and girts (wall) are frequently cold-formed steel C, Z or U sections, (or mill rolled) C sections.
Cold formed members can be efficient on a weight basis relative to mill rolled sections for secondary member applications. Additionally, Z sections can be nested for transportation bundling and, on the building, lapped at the supports to develop a structurally efficient continuous beam across multiple supports.<o:p>
Please contact me without any hesitition if you have any problems of our products !
We will offer warm-hearted service to you !
Q:Are you trading or manufacturer?
A:We are manufacture with exporting rights.
Q:How could you guarantee your quality?
A:The third inspection can be available such as ISO and 9001:2008
Q:Could you supply samples?
A:Yes,we can.
Q:What's your payment method?
A:T/T is the best payment, but also L/C is received.
Pls send your inquiry details in the below.
Click"send" now!
Contact me :Ashley zhu
Audited Supplier 
){kind=link}
){kind=link}